PI mit Android fernsteuern mittels VNC (vino)
=============================================
https://www.raspberrypi.org/forums/viewtopic.php?f=66&t=122007


I have an ubuntu laptop and Raspberry Pi with a fresh Raspbian-jessie on the uSD

I open a terminal on the laptop and type:

ssh user@address -X
(replace user and address, for your user and address of the pi)

input your pi password

type:
sudo apt-get install vino dconf-editor
confirm with y
type:
dconf-editor
This opens a window on your laptop with dconf-editor
go to:
org ==> gnome ==> desktop ==>remote-access
uncheck prompt-enabled
uncheck require-encryption

close dconf-editor
(I opened dconf-editor again to check if everything was saved)

to start vino at boot type:
mkdir /home/pi/.config/autostart

nano /home/pi/.config/autostart/vino.desktop

Than copy / paste below into nano

[Desktop Entry]
Encoding=UTF-8
Type=Application
Name=VINO
Comment=
Exec=/usr/lib/vino/vino-server
StartupNotify=false
Terminal=false
Hidden=false

press the key combination (at the same time)
control X
confirm with Y
than enter

don't forget to reboot the pi, else it won't work. type:
sudo reboot

I think you also need to have run, raspi-config in the terminal to make sure you boot into a desktop with autologin. I already did that, so I can't check if that is really needed or not


----------------------------------------------------


https://www.elektronik-kompendium.de/sites/raspberry-pi/2011021.htm

Vorbereitungen

Um den Desktop per VNC fernsteuern zu können, muss der Raspberry Pi natürlich den Desktop automatisch starten. Dazu stellt man mit "raspi-config" den Start-Modus auf "Enable Boot to Desktop/Scratch". Wahlweise mit oder ohne automatischer Anmeldung durch den Benutzer "pi".
Außerdem empfiehlt es sich den Grafikspeicher in "raspi-config" unter "Advanced Options > Memory Split" auf den Wert 64 (MByte) zu stellen.
Damit die Einstellungen übernommen werden muss der Raspberry Pi neu gestartet werden.

usw.


-------------------------------